Master Flash® Sticky roll

Master Flash® Sticky Roll is a high quality self adhesive waterproof and damp proof flashing tape for roof insulation. Made of EPDM rubber reinforced with stretchable aluminium mesh core for better profiling and shaping on roof tiles. It is used to seal roof joints in places difficult to waterproof like chimneys, dormer windows or adjacent walls.

Features:

  • self-adhesive, fully coated with butyl adhesive, with the film split in the middle
  • completely stable and self-supporting
  • very resistant to UV radiation
  • soft and lightweight , easier to lay out than traditional aluminium tapes
  • environmentally friendly can replace lead in any kind of roof covering applications
  • can be applied to various surfaces, i.e. metal, plastic or ceramic
  • available in 5 colours, black, graphite, light grey, terra-cota red and chocolate brown
  • 4 different sizes (Width x Length): 200 mm x 5 metres, 300 mm x 5 metres, 450 mm x 5 metres, 600 mm x 5 metres
  • obtainable in two types, Flat for standard applications and Wave with increased shaping capabilities for applications where more stretch is needed
  • 10-year warranty

Master Flash® Sticky roll flat

Master Flash® Sticky Roll Flat features aesthetically pleasing texture. There are five available colours allowing for easy matching to most commonly used roofings. Self-adhesive base allows for easy, tool-free installation, while the aluminium mesh reinforcement makes it easy to form by hand and completely stable in shape.

Width [mm] Lenght [mm] EPDM layer thickness [mm] Surface
200
5
1.5
Flat/Wave
300
5
1.5
Flat/Wave
450
5
1.5
Flat/Wave
600
5
1.5
Flat/Wave
  • StickyRoll is assembled by using its own adhesive
  • Apply at a temperature over 5°C, butyl adhesive is designed for porous surfaces, on smooth surfaces (metal roof or coated tiles) It’s recommended to use a butyl primer before application
  • Prior to assembly it is important that the surfaces are thoroughly cleaned. Furthermore, the surfaces should be dry and free from grease, oil and other release agents and loose particles
  • Form StickyRoll with a lead hammer or a rubber hammer
  • StickyRoll should be stored in the original box to avoid unnecessary damage and contamination. Do not store the product unwrapped in open sun light! Otherwise condition of butyl glue could be affected

Technical Datasheet

270 KB

Master Flash® Sticky roll WAVE

Master Flash® Sticky Roll Wave features corrugated surface designed to better adapt the flashing shape to match joining place of two different surfaces. When needed the corrugations can be straightened by hand to expand the flashing locally without stretching the whole flashing. Self-adhesive base allows for easy, tool-free installation while the aluminium mesh reinforcement makes it easy to form by hand and completely stable in shape.  

Width [mm] Lenght [mm] EPDM layer thickness [mm] Surface
200
5
1.5
Flat/Wave
300
5
1.5
Flat/Wave
450
5
1.5
Flat/Wave
600
5
1.5
Flat/Wave
  • StickyRoll is assembled by using its own adhesive
  • Apply at a temperature over 5°C, butyl adhesive is designed for porous surfaces, on smooth surfaces (metal roof or coated tiles) It’s recommended to use a butyl primer before application
  • Prior to assembly it is important that the surfaces are thoroughly cleaned. Furthermore, the surfaces should be dry and free from grease, oil and other release agents and loose particles
  • Form StickyRoll with a lead hammer or a rubber hammer
  • StickyRoll should be stored in the original box to avoid unnecessary damage and contamination. Do not store the product unwrapped in open sun light! Otherwise condition of butyl glue could be affected

Technical Datasheet

270 KB